Click To Enlarge
For Intermediate to Advanced Modeler/Fliers.
FEATURES: Construction: Balsa and plywood. Wings: One-piece all wood. Aileron Control: Dual servo. Cowl: Painted fiberglass. Canopy: Clear plastic with painted pilot figure. Covering: Factory applied Oracover in a red and white trim scheme. with blue and yellow accents, black stars and black lettering. Radio Compartment: Easily accessible over wing, plywood reinforced. Spinner: 2.25" (57mm) red plastic. Landing Gear: Prebent aluminum 3/16" (4mm) thick with 0.078" (2mm) diameter wire. Wheel Pants: Painted fiberglass. Wheels: Main, 2.2" (57mm) treaded rubber, tailwheel, 1" (25mm). Warranty: 90 day limited warranty beginning at date of purchase. Building Time: Ready to fly in several hours. INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, pushrods, pre-bent main landing gear, tailwheel wire and wheel, main wheels mounted aluminum non-adjustable engine mount, fuel tank, spinner foam padding, pilot bust, wood servo trays and wing joiners, hardware package, decal sheet and photo-illustrated instructions. REQUIRES: Radio: At least 4 channels. 6" (152mm) Extensions: Two. Servos: 5-Standard (2-Aileron, 1-Elevator, 1-Throttle (if using glow power) 1-Rudder). Servo Extension 6": Two for aileron servos. Y-Harness: One for aileron servos. Engine: .46 (7.5cc) 2-stroke OR .52 (8.5cc) 4-stroke. Muffler: Sports-style supplied with engine, cowl requires trimming to accomodate engine and muffler. Propeller: Depending on selected engine. SPECS: Wingspan: 55.1" (1400mm) Length: 53.9" (1370mm) Weight: 6.1lb (2780g) Center of Gravity (CG): 4.3" (110mm) back from the leading edge of the wing at the fuselage side Airfoil: Fully-symmetrical, mid-wing placement.
- Item #: PMMA1345
- Manufacturer: Phoenix Models
- Manufacturer's Product Number: PMMA1345
- Condition: New
