Park Pilot Program Legal Aircraft. This SU-31 3D is part of the ElectriFly E-Performance Series. For intermediate to experienced flyers 14 years of age and older.
FEATURES: Construction: Balsa and ply with prehinged ailerons and rudder and airfoiled control surfaces, motor box preinstalled with blind nuts providing perfect spacing for spinner backplate-no need for measuring, cowl ring also preinstalled. Wings: Two piece with carbon fiber wing joiner, secures to fuselage with wing hooks and rubber bands inside fuselage. Motor Mount: Built-up plywood. Covering: Top Flite MonoKote. Aileron Control: Dual servo. Cowl: Prepainted fiberglass, attaches with rare earth magnets. Canopy: Clear, single. Wheel Pants: Prepainted ABS. Landing Gear: Prepainted aluminum 0.079" (2mm) thick. Wheels: Two foam 1.75" (44mm) diameter. Spinner: White plastic, 1.75" (44mm) diameter. Hardware: Full set included. Building Time: Approximately 4-6 hours. Warranty: Great Planes Model Manufacturing Company guarantees this kit to be free from defects in both materials and workmanship at date of purchase.
INCLUDES: ElectriFly ARF SU-31 3D Aerobatic Airplane with fiberglass cowl, ABS wheel pants, landing gear, wheels, hardware, photo-illustrated instruction manual and two decal sheets.
REQUIRES: Radio: 4 channel computer radio recommended. Servos: 4-micro. Dual Servo Extension: For aileron servos. 6" (150mm) Slim Extension Wire: Two. 12" (305mm) Servo Extension: Two. Motor: Rimfire 35-30-1250 outrunner. 35A ESC for Brushless Motors. Battery: LiPo 1250 - 1500mAh 11.1V. Cell Balancer: For LiPo battery. Battery Charger: LiPo compatible. Propeller: 10x7E.
SPECS: Wingspan: 41" (1040mm). Wing Area: 343 sq in (22.1 sq dm). Weight: 27.5 - 31 oz (780 - 880g). Airfoil: Fully symmetrical, mid wing placement. Wing Loading: 11.5 - 13 oz/sq ft (35 - 40 g/sq dm). Length: 38" (965mm). Center of Gravity: 2-5/8" (67mm) back from the leading edge of the wing at the fuselage side.
COMMENTS: Pilot figure shown in photos not included.
