FEATURES: Fuselage: Painted fiberglass.
          Wings: One-piece balsa and ply.
          Aileron Control: Single servo.
          Covering: Top Flite MonoKote.
          Landing Gear: Two-piece aluminum.
          Wheel Pants: Painted fiberglass.
          Wheels: Foam, main, 1.8"  (45mm) foam, tailwheel 0.78" (20mm).
          Canopy: Single, clear.
          Spinner: Red plastic 1.75" (44.4mm).
          Warranty: Great Planes Model Manufacturing Company guarantees this   
            kit free from defects in both materials and workmanship at         
            the date of purchase. This warranty does not cover any component   
            parts damaged by use or modification.                              
                                                                               
INCLUDES: ARF Cosmic Wind Sport Scale Aerobat with Spinner, Landing Gear,      
            Wheels, Prop Adapter, Decal Sheet, Hardware and Instruction Manual.
                                                                               
REQUIRES: Radio: Four channel.
          Servos: Three micro, high-torque.
          Servo Extension: One 9".
          ESC: 35A brushless.
          Motor: ElectriFly RimFire .10 Brushless Outrunner recommended,       
            GPMG4595.
          Propeller: APC 8x8E recommended if using motor listed above.
          Battery: At least 1500mAh 11.1V 25C LiPo.
          Battery Charger: LiPo compatible.
          Building and field equipment.
                                                                               
SPECS:    Length: 36" (915mm).
          Wing Area: 254 sq in (16.4 sq dm).
          Weight: 27.5-29.5oz (780-835g).
          Wing Loading: 15.6-16.7oz/sq ft (48-51g/sq dm).
          Length: 32" (815mm).
          Airfoil: Semi-symmetrical.
          Configuration: Low wing.
          Center of Gravity, (CG): 2-1/16" (52mm) back from the leading edge of
            the wing at the fuselage side.
          Control Throws:             Low Rate             High Rate           
            Elevator up & down:     1/8" (3mm) 4°        1/4" (6mm) 8°         
            Rudder right & left:    3/8" (10mm) 10°      9/16" (14mm) 14°      
            Ailerons up & down:     1/8" (3mm) 7°        3/16" (5mm) 11°       
                                                                               
COMMENTS: Following are the Top Flite MonoKote colors used on this model and   
            order numbers for 6' rolls; Missile Red, TOPQ0201, Jet White, TOPQ0204.